When you flush, water from the cistern splashes into the bowl, hurling the waste and pipe out of the house. If your toilet is clogged, it may take a long time for the water from a flush to drain, causing the bowl to overflow. Of course, if this happens to you, you should stop flushing immediately!
Allowing water to do its thing and removing whatever is causing the clog may cause the toilet to unclog. There are times, however, when patience is not an option, and a quick fix is required. As a result, knowing how to unblock a badly blocked toilet without a plunger is critical.
How to Unblock a Badly Blocked Toilet
Unclogging a toilet can be done in several different ways. The clog could be removed in several ways: dissolved, forced down the drain, or extracted entirely.
Vinegar and baking soda
With their antibacterial characteristics, baking soda and vinegar are great for keeping your pipes clean and healthy. Put a cup of baking soda in the toilet bowl to break up a clog if it becomes completely clogged. After waiting a few minutes, two cups of vinegar should be cautiously added to the toilet. You should let the baking soda and vinegar mixture take a few minutes to work.
You should flush the toilet to see if the blockage has been removed. We advise you to keep going till the problem is fixed. You know the clog is gone when you hear a rapid sucking noise from your toilet, and the water flows freely again.
Unclog your toilet with a coat hanger
A coat hanger that has been unraveled may be able to unclog a toilet if a plunger is unsuccessful. Reduce the bend in the coat hanger by cutting it. The best way to clear a clogged toilet is to use a coat hanger and a twisting motion to force the obstruction through the pipes. If you can’t see or feel the obstruction, it may be too far away for DIY solutions and require expert intervention.
Hot water and washing-up liquid
The next way to fix a toilet that won’t drain is to scoop as much water out of the bowl as you can using a bucket or other container. To aid in the breakdown of fatty compounds and to lubricate the waste pipe, pour half a cup of dishwasher liquid or soap into the toilet bowl. Wait for some minutes for the soap to start working.
Next, pour boiling water into the bowl rapidly from above, utilizing a large container like a bucket. The resulting pressure should be sufficient to break apart the obstruction. Depending on the results, you may want to do this several times. The issue may be remedied if the water level is restored to normal. Try flushing if you think the clog might be gone and everything is running well.
Related: How to Unclog Toilet When Nothing Works
Using an auger
An auger is a flexible tool with a corkscrew-like head that can be used to perforate the obstruction and either pull it apart or break it up so it can be flushed away. This method of unclogging the toilet is the most effective when tangible things have fallen into the toilet and become lodged in the waste pipe. To use a manual toilet auger:
The obstruction can be felt by pushing the drill’s tip down the toilet. While pushing down with one hand, hold the drill in place and slowly rotate the handle with the other. You may remove the auger from the toilet by turning the handle back after it has punctured the clog. Make sure there is no clog by flushing.
Plunge using a plastic bottle
You can also use a plastic bottle to remove a clog in the toilet. Keep in mind that this can be revolting, but it’s also very powerful, so give it a shot. Step one is to remove the base from a plastic bottle.
Rubber gloves and old clothes should be worn next, and the floor should be lined with newspaper or old towels in case of spills. Then, using a bucket, remove the contaminated water from the bowl.
Once you’ve drained the dish enough to reach your hand in without spilling, you can take the bottle. The bottle can be sealed in several ways, including leaving the lid on, sliding your thumb over the top, or wrapping it in plastic wrap and fastening it with a rubber band.
Finally, with the open end of the bottle facing down into the toilet, plunge it up and down many times. Check to see that the bottle stays submerged the entire time. As the vacuum is created, the blockage should be drawn out of the pipe and into the drain.
A toilet brush
You can use your toilet brush in place of wire hangers if you don’t have any. Turn the drain into a whirlpool by scrubbing the hole with a brush. Using a light touch while applying paint with a brush is important, and your goal should be to avoid breaking the toilet. Before attempting this procedure, safeguard your hands and eyes by donning rubber gloves and safety glasses. After each use, toss the toilet brush and replace it with a fresh one.
What Causes the Toilet Blockage?
A toilet may unclog on its own if the object causing the clog is biodegradable or otherwise harmless. Simply put, the clogged toilet will not fix if you flush anything other than toilet paper or human feces. Sanitary pads, diapers, and wipes are a few examples of commonly-flushed items that shouldn’t be. Because they don’t break down, items like this might clog toilets.
Conclusion
A clogged toilet is a major annoyance. Fortunately, there are several methods for unclogging a toilet and avoiding the problem in the future. If one method we mentioned on how to unblock a badly blocked toilet does not work, try another two or three before calling a plumber. On the other hand, you can usually clear the obstruction with a plunger.